TUG 660 Belt Loader

With the heaviest chassis in its class, the TUG 660 BELT LOADER assures years of dependable service in the most demanding ramp applications. The central mounted conveyor is elevated at both ends by lift arms that are activated by single-stage, double-acting cylinders. The front of the conveyor operates at heights between 43 and 170 inches (1.09 and 4.32 m) while the height at the rear of the unit can be adjusted between 13 and 37 inches (0.33 and 0.94 m). The unit is equipped with belt controls operable from either end of the conveyor and an interlock prevents the engine throttle from being advanced for adjustment of belt speed unless the Direction Control is in neutral. A guide on each side of the conveyor assembly can be retracted if a clear conveyor surface is required. A collapsible safety rail is fitted on the side of the conveyor and an emergency hydraulic pump is standard equipment.

• Length 300" (7620 mm)
• Width excluding side bumpers 78" (1981.2 mm)
• Height 59" (1498.6 mm)
• Wheelbase 110" (2794.0 mm)
• Conveyor length less front bumper 294" (7467.6 mm)
• Conveyor width less guide rails 34" (863.6 mm)
• Conveyor capacity at full incline 2000 lb (907 kg)
• Belt width 24" (609.6 mm)
• Gross vehicle weight 6680 lb (3030.0 kg)
• All hydraulic hoses rated at 2250 psi
• Non-slip surface on fenders
• Non-slip surface on brake pedal

How To Inspect and Operate a TUG 660 Belt Loader Operations Overview